Metrology room
A climate-controlled room with two CMMs, a vision system, profile projectors and surface-finish gauges. Every new tool is signed off here against your drawing, and capability studies are run on the dimensions you nominate as critical.
Quality
How we prove a part is right
Certified systems, an in-house metrology room, and a paper trail that is ready before the auditor asks.
Certified to
The systems behind the parts
ISO 9001:2015
Quality management, certified and audited annually.
ISO 14001:2015
Environmental management across the plant.
IATF 16949
Automotive line, with PPAP to Level 3 and SPC.
ISO 13485
Medical moulding line and the Class 8 cleanroom.
SIRIM registered
Local conformity and material declarations on request.
Inspection flow
What happens to a shot before it ships
01
First-off approval
Every setup starts with a first-off part checked against the control plan before the run is released.
02
In-process checks
Operators gauge to a set frequency; cavity-pressure and part weight are logged for each cycle.
03
Final & CMM
AQL sampling at final, with periodic full CMM layouts on critical dimensions.
04
Release with paperwork
Parts ship with a certificate of conformance, and PPAP or ISIR where the programme calls for it.
Have a part to quote?
Send us a drawing and a volume. We'll send back a plan.
A quote covers the tool, the part price at your volume, the lead time and the DFM changes we'd recommend. No obligation, and your files stay under NDA.